March 01, 2011 >
Share Print Select a service Email Digg Facebook Stumble Twitter Delicious Close Email Your Name Your Email * Your Friends Email * Separate multiple addresses with commas. Subject * Message * http://utcfssecurityproducts.cma.sharepoint.fs.utc.com/CustomerSupport/Pages/16-Channel-PENTA-HOLD.aspx
http://www.utcfssecurityproducts.com/CustomerSupport/Pages/16-Channel-PENTA-HOLD.aspx
July 29, 2010 >
POTENTIAL ISSUE: A smoke alarm component (a capacitor) can overheat causing unit to smoke, sounding the alarm, and leaving smoke / soot residue.
http://www.utcfssecurityproducts.com/CustomerSupport/Pages/ESL-320ACC,-320ACX,-10.aspx
January 22, 2010 >
This bullletin is to inform you of recent issues concerning FSRA10(F) and FSRA10C(F) Remote Annunciators, and how to resolve them.
http://www.utcfssecurityproducts.com/Custom
…
eworX-FSRA10-Series-Remote-(FNN-10005F).aspx
January 20, 2010 >
We have reports of fire alarm control panels operating abnormally when handheld radios are in close proximity.
http://www.utcfssecurityproducts.com/Custom
…
Interference-from-Handheld-(FNN-10004F).aspx
June 11, 2009 >
We received a customer report that TX-6010-01-1 wireless smoke alarms were initially testing correctly using aerosol test smoke, but were then sending CleanMe signals to the control panel, warning that they were overly sensitive.
http://www.utcfssecurityproducts.com/Custom
…
t/Pages/TX-Series-Field-Notes-TFN-09014.aspx
May 22, 2009 >
The 60-362-10-319.5 Door Window Sensor has had an extended “Grey Capacitor” warranty replacement program since November 16, 2006 that allowed customers to return suspect product and receive replacement units at no charge.
http://www.utcfssecurityproducts.com/Custom
…
ges/Wireless-Crystal-Door-Window-Sensor.aspx
March 24, 2009 >
There is a noncritical issue with the product documentation shipped with FireworX FX series fire alarm control panels.
http://www.utcfssecurityproducts.com/Custom
…
worX-Product-Documentation-(FNN-09006F).aspx
November 19, 2007 >
GE Security has determined that versions 4.1, 4.2 and 4.3 of the Simon 3 Security Panels operate differently than described in the Simon 3 Installation Manual in the section entitled “Swinger Shutdown.”
http://www.utcfssecurityproducts.com/Custom
…
,-Versions-4.1-4.2-4.3-Swinger-Shutdown.aspx
April 16, 2007 >
GE Security is notifiying our customers that the automatic (VOX) 2-way voice mode on Simon 3 panels, revision 4.2, may not work as intended.
http://www.utcfssecurityproducts.com/Custom
…
otential-Issue-with-Simon-3-Version-4.2.aspx
February 17, 2007 >
GE Security has received reports from our dealers that once our 500N-based wireless smoke alarms send a low battery signal to the alarm panel, and after replacing the batteries, a second low battery signal is received, often within weeks of installing the new batteries.
http://www.utcfssecurityproducts.com/Custom
…
ges/500N-Based-Wireless-Smoke-Detectors.aspx