|
Phone cord49-069 RJ-31X Telephone Cord Learn More
|
Enterprise Downloader600-1043 Enterprise Downloader is a modular, scalable software solution for remote programming. Learn More
|
Easy Access Software60-648 Easy Access software is a Microsoft Windows based application. Learn More
|
Help Button Accessory Kit, for 60-906-95 and 600-1011-95R60-968 Includes plastic adaptors, fittings and wristbands for the Crystal or SAW Micro Wristwatch Panic Buttons. Learn More
|
Door Control KitAL-SYS-B Kit consists of: (2) AL-1170 Weigand Interface Module (2) AL-1645 Plastic Enclosure, Small Learn More
|
DGP Zone Expansion KitAL-SYS-C Kit consists of: (1) AL-1205 8-Input DGP with power, no enclosure (1) AL-1206 8-Zone Plug-In Expander Learn More
|
Intelligent Door KitAL-SYS-G Kit consists of: (1) AL-1256 4-Door Controller DGP, 3A, no enclosure, 1 MB (1) AL-1682 Metal Enclosure Learn More
|
Download Software for NetworX NX PanelsDL900 Download Software Package for NetworX NX security panels. Learn More
|
Micro/Reader Junction BoxMicro/Reader Junction Box The Micro/Reader Junction Box (M/RJ box) provides a cost-effective union point for the complete wiring of microcontrollers, readers, and door controls. Learn More
|
|
UL Commercial EnclosureNX-003-C UL Commercial Intrusion Enclosure Learn More
|
|
Smart ReaderNX-1700E The NetworX NX-1700E is a cost-effective proximity card reader and door control module. Learn More
|
Smart CardNX-1705E The NetworX NX-1700E is a cost-effective proximity card reader and door control module. Learn More
|
Smart KeyfobNX-1706E The NetworX NX-1700E is a cost-effective proximity card reader and door control module. Learn More
|
Single Door Control ModuleNX-1710E The NX-1710E Single Door Control module enables NetworX panels to interface with most popular Wiegand card readers. Learn More
|
Zone Doubling Resistor KitNX-200 The Zone Doubling Resistor Kit contains (100) 3.74k ohm and (100) 6.98k ohm resistors. Learn More
|
|
Smart Power Supply And Bus ExtenderNX-320E The NX-320E is a remote power supply module for NX control panels. Learn More
|
Seven Relay Expander ModuleNX-507E The NX-507E Seven Relay Expander Module is equipped with seven separate normally open and normally closed relay contacts for a variety of applications. Learn More
|
Eight Output Expander Module NX-508E The NX-508E Eight Output Expander is equipped with eight low-current trigger outputs with a built-in parallel interface for local printouts. Learn More
|
Two-Way Voice ModuleNX-534E The NX-534E Two-Way Voice Module can be added to new or existing NX-8/NX-8E panels. Learn More
|
"Operator" Telephone Interface ModuleNX-540E The "Operator" Telephone Interface module can be added to NX control panels. The "Operator" converts any touchtone telephone to a system keypad. Learn More
|
AES Long Range Radio Interface ModuleNX-582E The AES Long Range Radio Interface module allows any or all events from the NX-8/NX-8E control panel to be reported via the AES radio models. Learn More
|
Home Automation Interface Module With RS232NX-584 The NX-584 is a low cost add-on module that fits into a NetworX system enclosure and provides a standard RS-232 bi-directional DB-9 connector for connection to a home automation host system. Learn More
|
Direct Connect ModuleNX-586E The NX-586E can store up to four NX panel configurations within its own non-volatile memory. Learn More
|
NX-588E USB Single Program Flash ToolNX-588E The NX-588E USB Flash Programmer is a microcontrolled device with the capability to store one copy of the firmware for all NX V2 panels within its own non-volatile memory. Learn More
|
Network ModuleNX-590E The NX-590E NetworX module brings new functionality to the world of controls with Ethernet connectivity. Learn More
|
NetworX Wireless GSM ModuleNX-591E-GSM The NX-591E-GSM is a self-contained GSM modem module for the NetworX control panels. Learn More
|
NetworX Wireless GSM Module, AMPS Replacement UnitNX-591E-GSM-RP The NX-591E-GSM-RP is a self-contained GSM modem module for the NetworX control panels. Learn More
|
|
|
|
|
|
|
|
12 V, 33 mAh Alkaline Battery, 6/Pk60-711 12 V, 33 mAh Alkaline Battery for use with keychain touchpads, 6-pack Learn More
|
9 VDC UltraLife Lithium Battery60-713 Battery Replacement 9V Lithium Ultralife Learn More
|
|
|
Rechargeable Battery Pack (Simon V2)60-795 7.2 VDC, 18-hour Nmh Rechargeable Battery Pack for Simon V2 Learn More
|
|
6 VDC Rechargeable Backup Battery60-914 6 VDC, 1.2 Ah 24-Hour Rechargeable Backup Battery Learn More
|
|
Low Battery Cutoff Relay ModuleMPI-266 The MPI-266 is a low-cost add-on relay module for 12 VDC battery-powered devices. Learn More
|
|
Programming Touchpad Cable60-791 The Programming Touchpad Cable lets you quickly and easily connect an alphnumeric touchpad to a panel for on-site programming. Learn More
|
|
|
|
|
GSM Cellular Communication Module for Simon 3 The Simon 3 GSM Cellular Module adds cellular communication capability to the Simon 3 system. Learn More
|
GSM Cellular Communication Module for Simon XT The Simon XT Cellular Module adds cellular communication capability to the Simon XT system. Learn More
|
Wireless GSM Gateway Module for Concord 4 The GSM Module enables the Concord 4 to communicate signals wirelessly over the GSM cellular network. Learn More
|
|
LineGrabber Line Seizure Module60-978 The LineGrabber module easily attaches to existing telephone devices, providing a simple solution to line seizure neds in homes with more than one telephone device. Learn More
|
|
8-Input DGP with Power (no enclosure)AL-1205 Alliance Data Gathering Panels (DGP) are used to expand the number of zone inputs on the system, allowing users to set up inputs and relay outputs at locations away from the panel. Learn More
|
8-Input DGP (no enclosure)AL-1210 Alliance Data Gathering Panels (DGP) are used to expand the number of zone inputs on the system, allowing users to set up inputs and relay outputs at locations away from the panel. Learn More
|
8-Input DGP with Metal EnclosureAL-1211 Alliance Data Gathering Panels (DGP) are used to expand the number of zone inputs on the system, allowing users to set up inputs and relay outputs at locations away from the panel. Learn More
|
Wireless DGP with Plastic EnclosureAL-1231 Connect wireless sensors to your Alliance system through the Wireless DGP. Learn More
|
4-Door Controller DGP (no enclosure)AL-1256 The AL-1256 4-Door Controller DGP extends the Alliance system's access control and security functions. Learn More
|
4-Elevator Controller DGP (no enclosure)AL-1265 The AL-1265 4-Elevator Controller DGP extends the Alliance system's access control and security functions. Learn More
|
Point ID DGP with Plastic EnclosureAL-1291 AL-1291 Point ID DGP provides two-way communications with up to 32 individually addressed devices. Learn More
|
|
Expansion Enclosure60-793 Concord Expansion Enclosure Learn More
|
Commercial Panel or Expansion Enclosure60-816 Concord Commercial Panel or Expansion Enclosure Learn More
|
Multi-Purpose Housing60-928 The Multi-Purpose Housing is designed to hold several different circuit boards and can be adapted for many different installation situations. Learn More
|
Small Plastic EnclosureAL-1645 The Alliance Small Plastic Enclosure will house a size 1 or size 2 card remotely from the panel. Learn More
|
Large Metal EnclosureAL-1680 Alliance Large Metal Enclosure for safes and vaults. Learn More
|
Large Metal EnclosureAL-1682 Alliance Large Metal Enclosure Learn More
|
Medium Metal EnclosureAL-1684 Alliance Medium Metal Enclosure Learn More
|
Small Metal EnclosureAL-1685 The Alliance Small Metal Enclosure will house a size 1 or size 2 card remotely from the panel. Learn More
|
Metal Battery BoxAL-1686 The Alliance Metal Battery Box houses the system batteries separately from the panel. Learn More
|
Comm Metal Enclosure (For NX-8/8E)NX-003-CB NetworX Comm Metal Enclosure (For NX-8/8E), with cam lock, no tamper, includes stand-offs. Learn More
|
|
|
|
SuperBus 2000 Automation Module W/Rs23260-783-02 The automation module integrates Concord with energy management systems, lighting controls and audio/video systems. Learn More
|
16-Zone Wireless Expander Module60-904-95R-16Z 16-Zone Wireless Expander Module Learn More
|
48-Zone Wireless Expander Module60-904-95R-48Z 48-Zone Wireless Expander Module Learn More
|
16-Zone Expander ModuleNX-216 NetworX 16-Zone Expander Module. For Use With NX-8, NX-8E, NX-8V2 panels. Learn More
|
16-Zone Expander ModuleNX-216E NetworX 16-Zone Expander Module for NX-8, NX-8E, and NX-8V2 panels. Learn More
|
Wireless Kit (One NX-416E Expander Module and Five Door/Window Sensors)NX-405 Add a receiver module to a NetworX control panel to make each panel compatible with NetworX wireless sensors. Learn More
|
Wireless Receiver for NetworX PanelsNX-548E The NX-548E receiver adds wireless capabilities to the NetworX line of control panels. Learn More
|
Networx Wireless Alarm.com Module with GSM RadioNX-592E-GSM Using the NX-592E-GSM NetworX wireless Alarm.com GSM module, NetworX owners can control and monitor their system status from the Alarm.com website. Learn More
|
|
Pro Series X10 Universal Module13-399 Communicates through existing AC wiring. Activates a relay for devices such as garage door openers, sprinklers, and curtains, using a keychain touchpad. Learn More
|
|
8-Zone Input Snapcard60-757 Add input devices to Concord panels in a snap with this expansion card. Learn More
|
SuperBus 2000 8-Zone Input Module60-774 Provide up to eight additional hardwire zones with the SuperBus Hardwire Input Module. Learn More
|
SuperBus 2000 Phone Interface/Voice Module60-777-01 Adds phone control, on-premise voice annunciation, and voice zone descriptors. Requires 8 ohm speaker. Learn More
|
8-Zone Plug-In Expansion ModuleAL-1206 Allows cost effective zone expansion to selected Alliance DGPs and system control panels. Learn More
|
Single Input Device, AddressableSI-ID The SI-ID is a single input device that allows you to connect a single non-addressable device to the PinPoint system. Learn More
|
|
Lock And Key Set For Enclosures60-763 Lock and keys for Concord Express Enclosures. Learn More
|
|
1 MB IUM Memory Expansion ChipAL-1830 The Alliance 1 MB Memory Expansion Chip not only expands the total number of users, but adds system functionality. Learn More
|
4 MB IUM Memory Expansion ChipAL-1831 The Alliance 4 MB IUM Memory Expansion Chip not only expands the total number of users, but adds system functionality. Learn More
|
8 MB IUM Memory Expansion ChipAL-1832 The Alliance 8 MB IUM Memory Expansion Chip not only expands the total number of users, but adds system functionality. Learn More
|
|
Tamper Switch And BracketNX-005 NetworX panel enclosure tamper switch and bracket. Learn More
|
|
|
|
Power Supplies
|
SuperBus 2000 2 Amp Power Supply600-1019 The 600-1019 provides an additional 12 VDC, 2 amps for Concord 4 system devices. Learn More
|
Class II Transformer600-1024 Class II Transformer, 16.5V, 40VA, with Power Line Carrier Learn More
|
Power Supply, Board OnlyCH12A Use to power systems requiring an external 12 VDC power source with loads not exceeding 1.75 Amps. Learn More
|
Power SupplyCH12AC Use to power systems requiring an external 12 VDC power source with loads not exceeding 1.75 Amps. Learn More
|
Switching Power Supply, Board OnlyHCP12SA High current switching power supply/recharger for power systems requiring external 12 VDC. Learn More
|
Switching Power SupplyHCP12SAC High current switching power supply/recharger for power systems requiring external 12 VDC. Learn More
|
Switching Power Supply (CUL listed)HCP12SULC High current switching power supply/recharger for power systems requiring external 12 VDC, CUL Listed. Learn More
|
Power Disconnect Low Battery Cutoff ModuleMPI267 Drops battery out At 7.5 VDC. AC.DC power disconnect switch on board. Learn More
|
|
Wiegand InterfaceAL-1170 Use the Alliance AL-1170 Wiegand Interface to interface Wiegand format readers on the Alliance data bus. Learn More
|
Smart Card Reader (Indoor)AL-1191 The Alliance smart card readers connect to the Alliance system and allow card holders to gain access to an area, open a door or elevator, or get goods or services from office equipment or vending machines. Learn More
|
Smart Card Reader (Outdoor)AL-1193 The Alliance smart card readers connect to the Alliance system and allow card holders to gain access to an area, open a door or elevator, or get goods or serveices from office equipment or vending machines. Learn More
|
HID ProxCard® II (50 Pack)AL-1440-50PKG The RF-programmable ProxCard® II proximity access card is the industry choice for a cost-effective solution to proximity access control. Learn More
|
Smart Card Clam Shell Design (50 Pack)AL-1450-50PKG The Alliance smart cards and smart tags operate with the AL-1623 programmer and the Alliance Manager software. Learn More
|
Smart Card, Slimline, PrintableAL-1470 The Alliance smart cards and smart tags operate with the AL-1623 programmer and the Alliance Manager software. Learn More
|
Smart TagAL-1473 The Alliance smart cards and smart tags operate with the AL-1623 programmer and the Alliance Manager software. Learn More
|
Smart Card ProgrammerAL-1623 The Alliance smart cards and smart tags operate with the AL-1623 programmer and the Alliance Manager software. Learn More
|
|
Addressable Four Input/Four Output Device4I4O-ID An addressable 4 input and 4 unsupervised output interface that allows you to connect up to 4 non-addressable devices to the PinPoint ID bus. Learn More
|
SuperBus 2000 Energy Saver Module60-620-01 Energy Saver Modules provide a money-saving and convenient way to monitor and control the premises heating and cooling temperature automatically. Learn More
|
Power Line Carrier (X10) Card60-755 Provides X-10 lamp module and wireless siren features with a plug-in card that is compatible with Concord Hybrid and RF16 panels. Learn More
|
Combo Input/Output Snapcard60-756 Add hardwire input and output devices to Concord panels in a snap with this combination expansion card. Learn More
|
|
SuperBus 2000 Voice Module60-836 Expand the panel with advanced voice messaging functions. Digital voice chip has a vocabulary of over 220 words. (Requires 8 ohm speaker). Learn More
|
4-Relay Expansion ModuleAL-1810 Through a ribbon cable connection, the AL-1810 provides cost effective expansion to selected Alliance DGPs and control panels. Learn More
|
Relay Card for Smart Readers (4 pack)AL-1812 The AL-1812 relay card provides low current inputs for open collector outputs, such as Alliance smart card readers. The relay cards come in groups of 4. Learn More
|
8-Relay Expansion ModuleAL-1813 Through a ribbon cable connection, the AL-1813 provides cost effective expansion to selected Alliance DGPs and control panels. Learn More
|
|
16.5 V, 40 VA Standard Transformer (UL listed)600-1023 Concord 4 Class II transformer, 16.5 V, 40 VA, UL listed for U.S. applications. Learn More
|
16.5 V, 40 VA Standard Transformer, (CUL/CSA listed)600-1023-CN Concord 4 Class II transformer, 16.5 V, 40 VA, CUL/CSA listed for Canadian applications. Learn More
|
|
|
|
|
|
|
|
24 VAC, 100 VA Class II Transformer60-823 discontinued 2009. Provides primary power to the panel. Learn More
|
International Class I Transformer60-829 For international use, not intended for the U.S. Provides primary power to the panel.(24 VAC, 100 VA, 220 V, 50 Hz) Learn More
|
24 VAC, 100 VA, 110 V Class II Transformer60-830 Discontinued 2009. Provides primary power to the panel. Learn More
|
Replacement Transformer60-898-ITI Replacement transformer Learn More
|
|
Alliance Transformer KitAL-1672 Alliance transformer kit for Alliance control panels and DGP devices in Alliance enclosures. Learn More
|
24 V, 100 VA Class I TransformerAL-1690 Alliance Class I transformer that fits in the AL-1682 or AL-1680 large housings. Learn More
|
24 V, 50 VA Class II TransformerAL-1691 Alliance Class II transformer that fits in the AL-1684 medium housing. Learn More
|
16.5 V, 50 VA Class II Plug-In TransformerAL-1692 Alliance Class II plug-in transformer, 16.5 V, 50 VA. Learn More
|
16.5 VAC, 40 VA TransformerT-0001 Transformer is compatible with NetworX and Concord control panels. Learn More
|
|
|
Four Input Four Output Device, Addressable4I4O-ID An addressable 4 input and 4 unsupervised output interface that allows you to connect up to 4 non-addressable devices to the PinPoint system. Learn More
|
Addressable ShatterPro Glassbreak Sensor5845-ID The 5845-ID is an addressable ShatterPro glassbreak sensor for the PinPoint system. Learn More
|
SuperBus 2000 Transceiver Module600-1025-01-95R The SuperBus 2000 RF Transceiver Module expands the RF reception range of compatible control panels. Learn More
|
2-Button Crystal Keychain Touchpad60-607-319.5 These small, powerful touchpads provide convenient portable control over security systems. Learn More
|
Saw Door/Window Sensors (25 pack)60-670-95R-PK 25 Pack Saw Door/Window Sensors Learn More
|
2-Button Saw Keychain Touchpad60-707-01-95R ELM Keychain Touchpads provide convenient, portable system control with ultimate security. Learn More
|
2-Button Encrypted Saw Keychain Touchpad60-832-95R ELM Keychain Touchpads provide convenient, portable system control with ultimate security. Learn More
|
Universal Fire Transmitter - N/O60-917-95 Discontinued 2009. The Universal Fire Transmitter (UFT) adds wireless capability to a standard hardwire fire detection device. Learn More
|
AP750W Addressable PIR Motion SensorAP750-ID An addressable PIR for use with the PinPoint ID bus interface. Learn More
|
NetworX Wireless ShatterProNX-488 ShatterPro, wireless, 319.5 MHz, crystal transmitter, compatible with NetworX panels. Learn More
|
Single Input Device, AddressableSI-ID The SI-ID is a single input device that allows you to connect a single non-addressable device to the PinPoint system. Learn More
|